4WD Rover Pro
4WD Rover Pro
Add Charging Equipment An internal charger allows the Rover to be charged using a charging dock. Without it the battery must be removed and charged with a wall charger.
No Charging Dock$0.00
The Rover Pros use high torque 2050KV in-runner brush-less sensored motors. That's a mouthful so lets breakdown what that means. There are two main types of DC motors, brushed and brushless. Brushes are a small strip of metal inside the motor that make contact from the rotor to the stator. These brushes wear out over time. By using brush-less motors it ensures our Rover Pros last a long time. In-runner simply refers to the fact that the rotor is in the middle. 2050KV refers to how fast the motor spins per volt that is applied. Lower values imply that the motor has more torque, and this is one of the lowest KV motors on the market, in fact we customize them to lower the KV rating. Sensored means that there is a built in hall effect sensor which allows the motor to spin start from a stop and spin slower than a sensor-less motor.
The Rover Pros use a military-grade high density lithium-ion battery pack with built in over-current and under-voltage protection, state of charge monitoring, temperature monitoring, current monitoring, and voltage monitoring. The operating voltage of the battery is 12V-16.8V. If more than 20A is ever pulled from the battery, it will shut itself off safely. All of the data from the battery is exposed with our ROS driver.
|Dimensions||62cm x 39cm x 25.4cm [24.4in x 15.4in x 10in]|
|Max Speed||2.5m/s [5.6mph]|
|Payload Capacity||100kg [220lbs]|
|Ground Clearance||8cm [3.1in]|
|Operating Temp||-20C to 50C [0F to 120F]|
|Run time (basic usage)||5 hours|
|User Power||Unregulated 12V-16.8V|
|Motors||2050KV inrunner Brush-less motors|
The chassis of the robot. Drive kits, batteries and charging equipment must be purchased separately. Computer is included in the R&D payload. We recommend all first time customers purchase an R&D payload.
|0-4||0%||3-5 business days|